Product ID:P-9101,HONEYWELL TONER CONCENTRATE
MSDS Date:01/01/1987
FSC:6850
NIIN:01-181-6224
MSDS Number: BGPYB

Emergency Phone: (312) 675-7600

Info Phone: 312-675-7600

Cage: NO148

Telephone: 312-675-7600

Cage: NO148

ISOPARAFFINIC HYDROCARBONS /SOLVENTS/

Fraction By Weight: 75.0%

ACGIH TLV: 400 PPM

UNIDENTIFIED COMPONENTS

Fraction By Weight: 2.0%

ACGIH TLV: 5 MG/CUM

Effects of Overexposure:EYES/SKIN:IRRITATION;INHAL:CAUSES HEAD,RESP
TRACT IRRIT,NAUSEA;INGEST:STOMACH UPSET,IRRIT GI,NAUSEA.

First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.

Flash Point:140F/60C (PMCC)
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
SPILL: DIKE AHEAD FOR LATER DISPOSAL. NOTIFY AUTHORITIES.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED
Other Precautions:DO NOT USE IN CONFINED AREAS W/POOR VENTILATION.AVOID
SKIN OR EYES CONTACT.

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS NOT DATED.

HCC:F4
Boiling Pt:B.P. Text:318-460F
Vapor Pres:<80
Vapor Density:5.5
Spec Gravity:0.846
Evaporation Rate & Reference:<1(BU-ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK LIQUID,SLIGHT AROMATIC ODOR.
Percent Volatiles by Volume:98

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:INCOMPLETELY BURNED CARBON PRODUCTS,
CO*2, CO.

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.